Does your valve have a tiny gauge, leak, or fill your Airgun WAY too fast? Upgrade to the same High Quality TJ3 valve as used on my Great White, Tiger Shark and Guppy, and get $78 in options FREE!

Use drop-down menu above to choose between 7/8" - 14 UNF neck thread (Used on 4500 PSI SCBA and other 4500 PSI Carbon Fiber Tanks, or smaller 5/8" x  18 UNF neck thread (Used on 4500 PSI Paintball Carbon Fiber Tanks). If in doubt, just call and we can help you.

Picture of my TJ3 Valve with Large Stainless Steel Glycerin-Filled Gauge and patent pending second gauge on left, other brand on right.

I've had customers call and say how they over-filled and damaged their Rifles while filling from one of those "Economy" DIN300/SCBA Valves that flows WAY TOO FAST!!! (valves that are made for breathing). Breathing (either the "Economy" DIN300 or the SCBA) valves are made to flow LOTS of air quickly for breathing, NOT slowly filling airguns. Blown burst discs, gauges that read 500PSI when the rifle is empty, etc. are just some of the issues resulting from over-filling their rifle. Replace that valve with the same High Quality TJ3 valve as used on my Great White, Tiger Shark and Guppy. It has a one-way restrictor for quickly filling the carbon fiber tank at your SCUBA Shop, while also allowing you to slooowly fill your Airgun for much safer filling.

OurTJ3 comes standard with 2.5" Large Stainless Steel Glycerin-Filled Gauge for determining the fill pressure into the gun. No multiple adapters needed to lean back the gauge that allow the gauge to snap off.

Does your tank have only one gauge?

Also available with patent pending second gauge that constantly shows the pressure inside the carbon fiber tank. 

My valves come in 2 different sizes, so they fit all 4500 PSI carbon fiber or paintball tanks.

Shown here with optional 2nd Gauge and Option 2A.

Opt 2A = Female Quick Disconnect on each end of hose and Male Quick Disconnect on Wrench-tight DIN300.

For a limited time, we are offering the Option 1 (Second Gauge) and Option 2A (Hose with FQD on each end, and DIN300 with MQD) FOR FREE when they sign-in and order through their ExpertHPA Account