My Account | View Cart | Checkout | AirTanksForSale | Our Technical Background

Products > Compressors > Bauer DiveMate 8 CFM Electric DMT-08 E1/E3


Bauer DiveMate 8 CFM Electric DMT-08 E1/E3

 
Was: $13,067.00 - $13,666.00
Now: $9,999.00
SKU:
DMT-08 E1/E3
UPC:
DMT-08 E1/E3
Qty:
Choose Electric or Gas:
 
 
 
Facebook Twitter
 
 
 

Brand new Bauer DiveMate DMT-08 E1/E3 5000 PSI compressor. Also available in the Elite version with Auto Condensate Drain at each stage, Inter-stage Gauges, and Auto-shutoff.  Call 714-612-5956 and SAVE $$$$$ due to special Bauer discount!

 

STANDARD SCOPE OF SUPPLY
  • Available in three sizes:
    •    Electric motor, single phase, or three phase
    •    Gasoline engine
    •    Diesel engine (DMT 08)
  • Inlet filter
  • Stainless steel intercoolers and aftercooler
  • High temperature switch (except D drive)
  • Vibration isolators
  • PO Purification (DMT 06)
  • P31 Purification (except DMT 06)
  • Low oil pressure switch (electric and engine drive with electric start)
  •  
Electric Models
  • Motor starter with NEMA 4 enclosure
  • Hour meter
  • Pressure switch
Dimensions
L x W x H inches (mm)   43 x 24 x 27 (1092 x 609 x 686)
WEIGHT pounds (kg)
  • 300-400 (136-181)

 

Technical Data

 

Model Charging
Rate*
Number
of
Stages
Motor FAD** RPM Purification
System
  scfm I/min   hp kW      
5000 psi Service (345 bar)
DMT06-E1/E3 6 170 3 5 3.7 5 1050 P0
DMT06-GS 6 170 3 6 4.5 5 1250 P0
DMT08-E1/E3 8.4 238 3 7.5 5.6 7 1300 P31
DMT08-GS 8.4 238 3 9 6.7 7 1350 P31
DMT08-DY 8.4 238 3 6.4 4.7 7 1350 P31
5000 psig (345 bar) - 6000 psig (414 bar) capable with purification upgrade to P41
DMT10-E1/E3 9.7 275 4 7.5 5.6 8.1 1180 P31
DMT10-GS 9.7 275 4 13.5 10 8.1 1180 P31

*Based on recharging an 80 cubic foot tank from 500 to 3000 psig.
**Compressor capacity referenced to standard inlet conditions.
E1= Single phase electric, 230 VAX/60 Hz   E3 = Single phase electric, 230 VAC/60 Hz.
Other voltages available on request.
GS = Gasoline engine drive, SUBARU DY = Diesel engine drive, YANMAR

Dimensions and weights are approximate and are subject to change.